Auto Track Increment; Balance - Philips CDR770BK Instructions For Use Manual

MENU MODE/RECORDING SETTINGS
D. Auto track increment / auto track
AUTO TRACK
1 Press STORE/MENU.
TEXT EDIT appears on the display.
2 Rotate the EASY JOG/ENTER key to select the AUTO TRACK
submenu.
AUTO TRACK appears on the display.
3 Press EASY JOG/ENTER to confirm.
ON appears on the display.
4 Turn the EASY JOG/ENTER key to select Auto track ON or
OFF.
• When ON is selected, track numbers will be automatically
incremented during recording.
• When OFF is selected, you can number the recorded tracks
yourself.
REM TOTAL REM TRACK
TIME TRACK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SYNC MANUAL
RECORD
DIGITAL I CD
OPTICAL I
RW
ANALOG
5 Press EASY JOG/ENTER to confirm.
AUTO TRACK appears on the display.
6 Press STORE/MENU to store settings and return to the
submenu or STOP 9 to exit.
26
ON
OFF
TIME STEP
STORE/ STORE/
EASY JOG CANCEL/
EASY JOG
MENU
MENU
DELETE
PROG
SHUFFLE ALL
REPEAT
ENTER
SCAN TRACK
E. Balance (only active in Record/Standby mode)
SET BALANCE
1 Press STORE/MENU.
TEXT EDIT appears on the display.
2 Rotate the EASY JOG/ENTER key to select the SET
BALANCE submenu.
SET BALANCE appears on the display.
3 Press EASY JOG/ENTER to confirm.
FE and L 100 R 100 appear on the display.
REM TIME TRACK TOTAL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SYNC MANUAL RECORD
DIGITAL I CD
OPTICAL I
RW
ANALOG
4 Adjust recording balance by turning the EASY JOG/ENTER
key.
• Turn left: the figure left (F) counts down, right counts up.
• Turn right: the figure right (E) counts down, left counts up.
5 Press EASY JOG/ENTER to confirm.
6 Press STORE/MENU to store settings.
Note: The balance setting will not be stored permanently.
L 100 R 100
REM TRACK TIME STEP
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK