Auto Track Increment; Balance - Philips CDR778 Instructions For Use Manual

D. Auto track increment / auto track
AUTO TRACK
1 Press STORE/MENU.
TEXT EDIT appears on the display.
2 Rotate the EASY JOG/ENTER key to select the AUTO TRACK
submenu.
AUTO TRACK appears on the display.
3 Press EASY JOG/ENTER to confirm.
ON appears on the display.
4 Turn the EASY JOG/ENTER key to select Auto track ON or
OFF.
• When ON is selected, track numbers will be automatically
incremented during recording.
• When OFF is selected, you can number the recorded tracks
yourself.
REM REC TIME TRACK TOTAL REM TRACK TIME
1 2 3 4 5 6 7 8 9 10 11
SYNC MANUAL
RECORD
CHANGER
DIGITAL I CD
OPTICAL
I
RW RW
ANALOG
5 Press EASY JOG/ENTER to confirm.
AUTO TRACK appears on the display.
6 Press STORE/MENU to store settings and return to the
submenu or STOP 9 to exit.
ON
OFF
STEP
EASY JOG
STOR E/ME NU
PROG
ENTE R
SHUFFLE ALL
CD
REPEAT
SCAN TRACK
E. Balance (only active in Record/Standby mode)
SET BALANCE
1 Press STORE/MENU.
TEXT EDIT appears on the display.
2 Rotate the EASY JOG/ENTER key to select the SET
BALANCE submenu.
SET BALANCE appears on the display.
3 Press EASY JOG/ENTER to confirm.
FE and L 100 R 100 appear on the display.
REM REC TIME TRACK TOTAL
SYNC MANUAL
RECORD
CHANGER
DIGITAL I CD
OPTICAL I
RW
ANALOG
4 Adjust recording balance by turning the EASY JOG/ENTER
key.
• Turn left: the figure left (F) counts down, right counts up.
• Turn right: the figure right (E) counts down, left counts up.
5 Press EASY JOG/ENTER to confirm.
6 Press STORE/MENU to store settings.
AUD IO CD PLAY BAC K
Note: The balance setting will not be stored permanently.
MENU MODE
L 100 R 100
REM TRACK TIME STEP
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
29