Advertisement
Fasteners
Without plinth
The machine must be firmly anchored to the floor!
Anchor fittings included:
The floor must be solid and able to support the ma-
chine. The fittings included are suitable for a solid
concrete floor. Anchor bolts and fittings for other floor
types must be provided on site.
On concrete plinth
The machine must be firmly anchored to the floor!
Anchor fittings included:
The grade of concrete should be suitable for the load.
The plinth should be firmly anchored to the floor to
accommodate dynamic stress!
Miele plinth
The plinth must be firmly anchored to the floor!
Anchor fittings included with plinth:
Both the machine and the plinth must be installed
according to the installation instructions provided.
Machine
The machine must be firmly anchored to the floor!
version
Anchor fittings included:
WI
The floor must be solid and able to support the ma-
chine. The fittings included are suitable for a solid
concrete floor. Anchor bolts and fittings for other floor
types must be provided on site.
Machine
The machine must be firmly anchored to the floor!
version
Fittings not supplied with machine.
OS
Internal anchor thread
Installation must comply with local requirements and
cater for on-site conditions. The machine is supplied
without feet to allow the interior thread to be used
with stay bolts.
Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011
2 × angle brackets (from shipping lock)
2 × bolts DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
2 × angle brackets (from shipping lock)
2 × bolts DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
4 × bolts DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
4 × angled anchor brackets
4 × bolts DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
mm
8 x 80
mm
12 x 60
mm
8 x 80
mm
12 x 60
mm
8 x 80
mm
12 x 60
mm
8 x 80
mm
12 x 60
mm
12
Seite / Page: 11
Advertisement
