Nikon SB-5000 Reference Manual page 151

■
Setting the zoom head position manually
In order to change the zoom head position to one that does not match
the focal length, the zoom head position must be adjusted manually.
• An above the
head position is set manually.
• Press the rotary multi selector 4 to highlight the zoom head position
and then use the rotary multi selector to set the zoom head position.
• Rotate the rotary multi selector clockwise or press it 1 2 to increase
the value, and rotate it counterclockwise or press it 3 4 to decrease the
value.
• Zoom head position can also be configured in menu (0B-11).
• In order to reactivate the power zoom function, press the button to
display menu and then choose
■
Power zoom function canceled
Power zoom function can be canceled in the setup menu (0B-24).
• An above the
zoom function is canceled.
• The zoom head position must be manually set. The zoom head position
does not automatically change when the lens focal length is changed,
the lens is replaced or the Speedlight is turned off/on.
• To set the zoom head position manually, see "Setting the zoom head
position manually. "
indicator appears on the LCD when the zoom
.
indicator appears on the LCD when the power
E
E-23