Nikon SB-5000 Reference Manual page 118

t
Setting flash output level in M mode
D
• In M mode, set the flash output level by pressing the rotary multi
selector 1.
• Flash output level can also be configured in menu (0B-11).
2.
Master flash unit setting
• Be sure to choose single flash-unit mode to use the SB-5000 attached to
a camera.
• Be sure to cancel the master flash unit monitor pre-flash function to
prevent the flash units from firing accidentally.
• Check the status of the flash units, and then shoot.
D-38
Press the rotary multi selector
4 to highlight the zoom head
position, use it to choose a
zoom head position, and then
press the OK button (0B-6).
• Flash mode and zoom head position
can also be configured in menu
(0B-11).