Yamaha RX-N600 Owner's Manual page 79

Primary DNS server DNS (P)
Secondary DNS server DNS (S)
Use this parameter to specify the IP address of the primary
and secondary DNS (Domain Name System) servers.
Note
If you have only one DNS address, enter the DNS address in
"DNS (P)". If you have two or more DNS addresses, enter one of
them in "DNS (P)" and another in "DNS (S)".
1
Press u / d on the remote control repeatedly
and then press ENTER to select and enter
the desired network parameter.
Note
When "DHCP" is set to "ON", you cannot select and adjust
any other network settings. To specify the other parameters,
you need to first set "DHCP" to "OFF".
2
To specify the parameter, press u / d repeatedly
to change the number and press j / i to select
the digit to change.
3
Press ENTER to confirm the parameter.
4
Repeat steps 1 through 3 to configure each
network parameter.
5
Select "SET" and then press ENTER to finish
configuration.
Note
In case you have changed your network configuration, you may
need to reconfigure the network settings again.
y
You can reset the network settings of this unit to the initial factory
settings by using "N-RESET" in the advanced setup menu (see
page 82).
Playback styles
B)PLAY STYLE
Use this feature to adjust the playback style according to
your preference. You can shuffle songs in a random order
or repeat one specific song or a sequence of songs.
B)PLAY STYLE
. REPEAT;;;;;;;OFF
SHUFFLE;;;;;;OFF
[ ]/[ ]:Up/Down
[<]/[>]:Select
Repeat REPEAT
Use this feature to set this unit to repeat one song or a
sequence of songs.
Choices: OFF, SINGLE, ALL
• Select "OFF" to deactivate this feature.
• Select "SINGLE" to set this unit to repeat one song.
• Select "ALL" to set this unit to repeat a sequence of
songs.
Notes
• When "REPEAT" is set to a setting other than "OFF", the
highlighted letter "R" appears in the top right corner of the
playback status screen while one song or a sequence of songs
are being repeated.
• If "REPEAT" is set to "SINGLE", the setting will be reset to
"OFF" when both the main zone and Zone 2 are turned off.
Shuffle SHUFFLE
Use this feature to set this unit to play songs or albums in a
random order.
Choices: OFF, ON
• Select "OFF" to deactivate this feature.
• Select "ON" to set this unit to play songs or albums in a
random order.
Note
When "SHUFFLE" is set to "ON", the highlighted letter "S"
appears in the top right corner of the playback status screen while
songs or albums are being shuffled.
SET MENU
77
En