Makita HR5000K Instruction Manual page 8

1
003244
Wipe out the old grease inside and replace with a fresh
grease (90 g; 3 oz). Use only Makita genuine hammer
grease (optional accessory). Filling with more than the
specified amount of grease (approx. 90 g; 3 oz) can
cause faulty hammering action or tool failure. Fill only
with the specified amount of grease.
Reinstall the crank cap and tighten with the lock nut
wrench.
CAUTION:
Do not tighten the crank cap excessively. It is made
•
of resin and is subject to breakage.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Bull point
•
Cold chisel
•
Hammer grease
•
Bit grease
•
Blow-out bulb
•
Safety goggles
•
Plastic carrying case
•
Spline shank Carbide-tipped bits
•
Scaling chisel
•
Grooving chisel
•
Spline shank to A-Taper adapter
•
Spline shank to SDS adapter
•
Core bit
•
Core bit adapter
•
Lock nut wrench 35
•
Clay spade
•
Side handle
•
1. Hammer grease
or attachments
Only use accessory or
Side grip
•
Rammer
•
Bushing tool
•
are
8