Connecting To The L8100 Puncher Unit - Labokey 8101SL Instruction Manual

4-3-3 Connecting to the L8100 Puncher Unit.

① Referring to the picture on the right, remove
the [Position Setting Plate B] by unscrewing
3 screws.
② Using 2 out of the removed 3 screws, connect
the L8101SL to the L8100 Puncher Unit.
Note: Bring down the Accumu-Section
backward for connecting to the L8100.
The Accumu-Section is supported
with the support plate.
Then, plug [Connecting Cord] of Accumu-Section
to [Connector] of the L8100
③ As shown per the right picture, put the L802
on to the Base Plate.
④ Firmly plug [Connecting Cord] of Accumu-
Section into [Connector] of the L802.
Then, plug the AC Adapter of the L802 to
the power jack.
L8100
Screws x 3
Position Setting Plate B
Connecting Cord
Connecting Cord
8
Connector
Power Jack