Warning Of Errors Operation - Labokey 8101SL Instruction Manual

4. Power OFF
L8101SL
Depress the O end of [POWER] switch to turn off the unit.
[POWER] LED turns off.
Unplug the AC Adapter from an outlet.

5-3-2 WARNING OF ERRORS OPERATION .

L8100
With the following operations when L8101SL stops, L8100 will also stop.
LED of [AUTO] switch goes on-and-off, and buzzer gives warning.
Depress [AUTO] switch..
LED of [AUTO} switch turns off, and stops the buzzer.
After correcting the errors, depress [AUTO] switch again.
L8101SL
For any abnormal operations, the buzzer gives warning.
Depress [START/STOP] switch, silence the buzzer.
After resolve the errors, depress [START/STOP] switch again.
For restarting operation, feed the paper by turning [Paper Feed Roller
Knob], making [Accumu-Roller] to stay at the highest position.
Then, start the L8100 operation.
1. Error in setting Paper Holder:
When depressing [START/STOP] switch, if the LED of the switch
lights and the buzzer keeps on buzzing, Paper Holder is not
correctly set. You cannot start laminating operation.
Depress [START/STOP] switch once more to silence the buzzer
and reset Paper Holder correctly.
Buzzer sound indicating the error in setting Paper Holder ‐‐‐‐‐‐
2. Detection of error by Space Sensor:
When the space between laminated prints exceeds 1mm, Space
Sensor will detect it and stop the operation.
[SPACE] LED lights and the buzzer starts buzzing.
Buzzer sound indicating the detection by Space Sensor
Depress [START/STOP] switch again to turn off [SPACE] LED
and silence the buzzer.
[SPACE] LED turns off as the space between papers is out of the
detecting range of the sensor. It keeps turned on when the space
is large enough.
−−−
- 15 -
〇 〇
〇
POWER P.END SPACE SEN.ON
―
〇
START/STOP
MANUAL
STICKER
〇
〇
POWER P.END SPACE SEN.ON
―
〇
START/STOP
〇
POWER P.END SPACE SEN.ON
―
〇
START/STOP
〇 〇
POWER P.END SPACE SEN.ON
―
〇
START/STOP
〇
AUTO
AUTO
AUTO
AUTO
AUTO