Specifications - Labokey 8101SL Instruction Manual

2. SPECIFICATIONS

This equipment is a modified model of LABOKEY 802 for the purpose of using in combination with a
puncher unit of Labokey 8100 automatic Sticker Print Puncher. Standard specifications arereferred
to the Instruction Manual for Labokey 802 enclosed in the package.
Applicable paper width:
Applicable paper length:
Paper feed:
Failsafe systems:
Control method:
Laminating Tape: Dedicated roll tape
Power source:
Measurements (WDH):
Weight:
Note: Specifications as well as exterior design may be changed for improvement without prior notice.
89 ‒ 127mm
89 ‒ 180mm
Automatic feeding and stop with photo sensors
Automatic feeding by Paper Feed Switch
Checking laminating errors with Space Sensor
Automatic stop by Paper End Sensor
By microcomputer
: 85mm wide, 100m long for 89mm wide paper
: 98mm wide, 100m long for 102mm wide paper
: 124mm wide, 100m long for 127mm wide paper
1. DC12V, 2.5A with a dedicated AC adapter (AC100-240V, 0.8A)
2. Power input through L8100
660 x 260 x 370mm
Approx. 20kg
5