Stihl FS 45 Instruction Manual page 15

STIHL AutoCut 5-2
4
2
1
3
Fit the spring (1) in the mowing
N
head (2).
Wind the mowing line (3) on to the
N
spool (4).
Thread the nylon line through the
N
sleeves and fit the spool in the head.
The individual steps are described in the
instruction sheet supplied.
FS 45, FS 45 C
3
6
Slip the mowing head (2) over the
N
shaft (5) and engage hex recess (7)
on the external hexagon (6).
Fit the cap (8) on the mowing head
N
– screw it clockwise on to the shaft
as far as stop and tighten it down
firmly.
STIHL AutoCut C 5-2
8
2
7
5
N
N
N
N
8
2
9
Slip the mowing head (2) on to the
shaft – as AutoCut 5-2.
Turn the spool (9) clockwise until
the two arrow heads line up –
secure the spool in this position.
Insert the cap (8) in the spool, press
it down as far as stop and turn it
clockwise at the same time.
Turn the cap until you feel
resistance and then tighten it down
firmly by hand.
English
13