Advertisement
PODV7CWNS/PODV7CPNS
IP Ready Network Housing
IP Ready Network Housing with 24Vac input, wall mount
or pendant mounting, heater & blowers, WV-NS202 and
camera.
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
!
Power 24Vac, Class 2 Only
Total Power: 52 watts (camera not included)
Accessories (Heater/Blower): 52 watts
Heater: 50 watts
Blower: 2 watt
Camera Power: 26 watts
NOTE: This unit is designed for operation in an
upright position. Installing the housing
upside down may cause damage to
the internal equipment, and will void the
warranty.
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
Be sure the bracket is properly and securely mounted
!
to a supporting structure capable of rigidly holding
the weight of the entire unit.
ASSEMBLING THE UNIT:
1. Remove content from all boxes.
Contents should include:
Main Housing Assembly
Either with wall mount or pendant bracket
Dome Assembly - Clear or Tinted
Do not remove the protective film until the product is
assembled and installed.
Packet Assemblies
- -
Advertisement
