Yamaha RX-V3900 Owner's Manual page 11

Step 3: Turn on the power and start
playback
Check the type of the connected speakers.
If the speakers are 6-ohm speakers, set "SPEAKER
IMP." to "6Ω MIN" before using this unit (page 27).
You can also use 4-ohm speakers as the front speakers
(page 111).
1
Turn on the video monitor connected to this
unit.
Press AMASTER ON/OFF inward to the ON
2
position on the front panel.
Rotate the C INPUT selector to set the input
3
source to "DVD".
4
Start playback of the desired DVD on your
player.
Rotate P VOLUME to adjust the volume.
5
6
To set this unit to the standby mode, press
BMAIN ZONE ON/OFF.
y
For details about turning on/off this unit and the standby
mode, see page 27.
■ For other operations
• Optimizing the speaker parameters
automatically
• Basic playback operations
• Sound field programs
• Pure high-fidelity sounds
• FM/AM radio tuning
• Bluetooth component playback
• iPod playback
• Playback via USB or network
Quick start guide
☞ P. 31
☞ P. 37
☞ P. 41
☞ P. 48
☞ P. 49
☞ P. 55
☞ P. 57
☞ P. 59
9
En