Mitsubishi MELSEC F2-60MR Instruction Manual page 16

The basic unit and extension unit have the output power ratings indicated in the above table. For
loads over the rated maximum limits shown, operation should be perforhed through an extra
relay, capable of handling the load. Loads under the minimum limits shown will need an additional
surge absorber circuit (approx. O.1pF
+
1OOSt)
to prevent incorrect operation due to leakage currents
ftowing in the output circuits.
Less than 35VA
Less than
80VA
Less than 120VA
on
I
Back-up fuses or circuit protectors are recommended on output circuits to prevent damage to the
circuit boards of the PC in the event
of
a short circuit fault in an external output circuit.
Inductive toad of
Relay Output
Appticabte toads to the output relays are subject to the frequency of operations. According to our
life test data, followings are given for a reference of the relay durability level;
U P to 3,000,000
UP to 1,000,000
up
to 200,000
I