Wireless Connection Setup; Setting Up A Wireless Connection Using The Wps Button; Manually Setting Up A Wireless Connection - Huawei HG552e User Manual

4

Wireless Connection Setup

Setting Up a Wireless Connection Using the WPS Button

Push the WPS button once to quickly set up a wireless connection between the HG552e and any WPS-
capable device.
Before you set up a wireless connection using the WPS button, verify the following:
>
The wireless network security mode of the HG552e is WPA2-PSK or WPA-PSK/WPA2–PSK.
>
The wireless device (laptop, tablet, or mobile phone) to connect to the HG552e is WPS-
capable.
1.
Press the WPS button on the wireless device to start WPS negotiation. For details, see the
user guide for the wireless device.
2.
Within 2 minutes, press and hold the WPS button on the HG552e for 1 second or more. The
WLAN indicator blinks.
When the WLAN indicator on the HG552e is steady on, a connection between the HG552e and
wireless device is set up.

Manually Setting Up a Wireless Connection

The wireless configuration software provided by Windows is used as an example to describe how to
set up a wireless connection.
You can also use the tool built into the network adapter to set up a wireless connection. For
details, see the network adapter's user guide.
Before setting up a wireless connection, record the WLAN name and password of the HG552e. The
default WLAN name and password are printed on the HG552e cover label.
On Windows 7
1.
Choose start > Control Panel > Network and Internet > Network and Sharing Center >
Change adapter settings. Right-click Wireless Network Connection, and select
Connect/Disconnect.
2.
From the wireless network list, select the WLAN provided by the HG552e. Click Connect.
8