Restoring Default Settings - Huawei HG552e User Manual

If you forget the password, you can restore the default settings by pressing and holding the
Reset button on the rear panel of the HG552e for over 6 seconds. The user name and
password used for logging in to the web management page are then restored to their default
values. After the HG552e is restored to its default settings, all user customized data will be
lost. Perform this operation with caution.

Restoring Default Settings

Using the Configuration Tool
If the HG552e parameter settings were configured incorrectly, log in to the web management page to
reload the default configuration file and restore the HG552e to its default settings. Perform this
operation with caution. After the HG552e is restored to its default settings, all custom data and settings
will be lost, and the password will be restored to admin.
1.
Log in to the web management page.
2.
In the navigation tree, choose Maintenance > Device.
3.
Click Restore Default Settings.
4.
In the displayed dialog box, click OK.
Using the Reset Button
If you forget the login password to the web management page or could not access the web
management page, use the reset button on the HG552e rear panel to restore the HG552e to its default
settings. Perform this operation with caution. After the HG552e is restored to its default settings, all
custom data and settings will be lost, and the password will be restored to admin.
1.
Press the HG552e power button to power the HG552e on.
2.
Press and hold the reset button for 6 seconds or more.
The HG552e will restart, which will cause temporary network interruptions.
After the HG552e is restored to its default settings, change the computer IP address so that
it is in the same network segment as the 192.168.1.1 default IP address.
15