Wireless Connection Setup; Setting Up A Wireless Connection Using The Wps Button; Manually Setting Up A Wireless Connection - Huawei HG658 V2 User Manual

4

Wireless Connection Setup

Setting Up a Wireless Connection Using the WPS Button

Push the WPS button once to quickly set up a wireless connection between the HG658 V2 and any
WPS-capable device.
Before you set up a wireless connection using the WPS button, verify the following:
•
The wireless network security mode of the HG658 V2 is WPA2-PSK or WPA-PSK/WPA2–PSK.
•
The wireless device (laptop, tablet, or mobile phone) to connect to the HG658 V2 is WPS-capable.
1. Press the WPS button on the wireless device to start WPS negotiation. For details, see the user
guide for the wireless device.
2. Within 2 minutes, press and hold the WPS button on the HG658 V2 for 1 second or more. The WPS
indicator blinks.
When the WPS indicator of the HG658 V2 is on and then turn off, a connection between the HG658
V2 and wireless device has been set up.

Manually Setting Up a Wireless Connection

The wireless configuration software provided by Windows is used as an example to describe how to
set up a wireless connection.
You can also use the tool built into the network adapter to set up a wireless connection. For details,
see the network adapter's user guide.
Before setting up a wireless connection, record the WLAN name and password of the HG658 V2. The
default WLAN name and password are printed on the HG658 V2 cover label.
On Windows 7
1. Click in the lower right corner of your desktop.
2. From the wireless network list, select the WLAN provided by the HG658 V2. Click Connect.
3. In the displayed dialog box, enter the WLAN password and click OK.
4. In the wireless network list, check the WLAN connection status. If the status is Connected, the
computer is wirelessly connected to the HG658 V2.
11