Setting Dial-Up Connection Parameters - Huawei HG552e User Manual

2.
On the Quick Configure Home Gateway: Wireless Network page, set WLAN SSID and
Key, and click Next.
To obtain the default SSID and key, check the label on the rear panel. To better secure your
WLAN, promptly change the SSID and key. The preceding configuration needs to be
performed only once. You can also configure the WLAN SSID and Key by choosing Basic >
WLAN.

Setting Dial-Up Connection Parameters

Before setting dial-up connection parameters, verify that the HG552e is correctly connected to your
computer and you have the dial-up connection account name and password provided by your Internet
service provider (ISP). This section demonstrates how to set up a Point-to-Point Protocol over Ethernet
(PPPoE) connection on Windows.
On Windows 7
1.
Choose start > Control Panel > Network and Internet > Network and Sharing Center.
2.
Under Change your networking settings, click Set up a new connection or network.
3.
In the Set Up a Connection or Network window, select Connect to the Internet and click
Next.
4.
Click Broadband (PPPoE).
5.
In User name and Password, enter the dial-up connection account name and password
provided by your ISP. In Connection name, name the dial-up connection. Select or deselect
Allow other people to use this connection. Then click Connect.
6.
Return to the Network and Sharing Center page. Click Change adapter settings. Right-
click the icon for the dial-up connection you just set up and choose Create Shortcut from the
shortcut menu. In the displayed dialog box, click Yes.
On Windows XP
1.
Choose start > Control Panel > Network and Internet Connections > Network
Connections.
2.
Under Network Tasks, click Create a New Connection.
3.
In the Network Connection Wizard dialog box, click Next.
4.
Select Connect to the Internet and click Next.
5.
Select Set up my connection manually and click Next.
6.
Select Connect using a broadband connection that requires a user name and
password and click Next.
7.
In ISP Name, name the dial-up connection. Click Next.
8.
Select Anyone's use or My use only and click Next.
9.
Enter the dial-up connection account name and password provided by your ISP and click
Next.
10.
Select Add a shortcut to this connection to my desktop and click Finish.
After you successfully set up a PPPoE connection, a dial-up connection icon is displayed on your
computer desktop. To connect to the Internet, double-click the dial-up connection icon. In the displayed
dialog box, click Connect.
7