Electronic Board Operations Check
■ Before Operation Check
Wipe the screen film surface.
1
• Soak a soft cloth with water, wring well, and
wipe the screen film surface.
Note
• Do not wipe the screen film surface with paint
thinner, benzene, or cleaners that contain
abrasives. Doing so may cause discoloration.
• Do not wipe the screen film surface with a dry
cloth. Doing so may create static electricity.
Attach the power cord.
2
• Securely fit the supplied power cord in the AC
inlet of the control box.
Power cord
Remove the battery protection sheet.
3
Battery protection sheet
■ Setting the time
Set the time as follows.
Turn the power switch on.
1
• The time set-up screen is displayed
automatically when the power switch is turned
on for the first time.
If the time set-up screen is not displayed even
when the power switch is turned on, press the
Set-up Key
then press the Set-up Key (
select the time set-up mode, and then press
the Advance Key (
Set the current time.
2
The value can be changed by pressing the Set-
up Key (
), and select the setting by pressing
the Advance Key (
Press the Mode Key (
3
to enter the setting mode,
) repeatedly to
).
).
) to set the time.
45