Panasonic UB-T580 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Whiteboard
  5. UB-T580
  6. Service manual

Panasonic UB-T580 Service Manual

Electronic board (elite panaboard)
Hide thumbs Also See for UB-T580:
Table of Contents

Advertisement

Quick Links

Download this manual
Electronic Board (elite Panaboard)
UB-T580
Model No.
UB-T580W
Model No.
© Panasonic System Networks Co.,Ltd 2012
Unauthorized copying and distribution is a violation
of law.
Order Number KM71201706CE
Category Number H19

Advertisement

Table of Contents
loading

Related Manuals for Panasonic UB-T580

Summary of Contents for Panasonic UB-T580

  • Page 1 Order Number KM71201706CE Category Number H19 Electronic Board (elite Panaboard) UB-T580 Model No. UB-T580W Model No. © Panasonic System Networks Co.,Ltd 2012 Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE 1 GENERAL PRECAUTIONS -------------------------------------3 1.1. Safety Precautions-----------------------------------------3 1.2. Standard for Repair Service -----------------------------3 1.3. For Service Technicians ----------------------------------3 1.4. About Lead Free Solder (PbF: Pb free) --------------4 1.5. About RoHS -------------------------------------------------4 2 SPECIFICATIONS -------------------------------------------------5 2.1. Before using this manual ---------------------------------5 2.2.

  • Page 3: General Precautions

    1 GENERAL PRECAUTIONS 1.1. Safety Precautions 1.2. Standard for Repair Service Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work. 1.

  • Page 4: About Lead Free Solder (Pbf: Pb Free)

    1.4. About Lead Free Solder (PbF: Pb free) Note • In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that contains lead. • We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn), Silver (Ag), and Copper (Cu).

  • Page 5: Specifications

    2 SPECIFICATIONS 2.1. Before using this manual This model (specifications, component parts, service parts, etc.) is different from each area/country. This difference can be distinguished by the Areas/Countries Distinction Mark (printed on the name plate). In this manual, the Areas/Countries Distinction Mark is used to distinguish this difference.

  • Page 6: Specifications

    2.2. Specifications 2.2.1. UB-T580 Item Model No. UB-T580 General Power Supply Supplied by the USB Bus (AC power connection is not required) Power Consumption 5 V / 500 mA (USB Bus Power) (Operating) External Dimensions** 1,352 mm x 1,713 mm x 74 mm (Height x Width x Depth) (4 ft.
  • Page 7 2.2.2. UB-T580W Item Model No. UB-T580W General Power Supply Supplied by the USB Bus (AC power connection is not required) Power Consumption 5 V / 500 mA (USB Bus Power) (Operating) External Dimensions** 1,352 mm x 1,991 mm x 74 mm (Height x Width x Depth) (4 ft.

  • Page 8: Abbreviations

    2.3. Abbreviations 2.4. Trademarks 2.5. System Requirements 2.6. Options, Accessories and Supplies Model No. Description Remarks KX-B061 Stand Optional Stand UE-608020 Electronic Pen UE-608021 Stylus Pen UE-608030 Up / Down Unit UE-608031 Stand Table Unit UE-608032 Short-Throw Arm Unit UG-6020 Penpoint Used for Electronic Pen...

  • Page 9: Exterior Dimensions

    2.7. Exterior Dimensions 2.7.1. UB-T580 2.7.1.1. When mounting using the wall mounting plates 2.7.1.2. When mounting using a Stand (sold separately: KX-B061)
  • Page 10 2.7.2. UB-T580W 2.7.2.1. When mounting using the wall mounting plates 2.7.2.2. When mounting using a Stand (sold separately: KX-B061)

  • Page 11: Component Identification

    3 COMPONENT IDENTIFICATION 3.1. Main Unit...

  • Page 12: Stylus Pen

    3.2. Stylus Pen...

  • Page 13: Installation

    The elite Panaboard is used by mounting it on a wall or a stand (sold separately). When mounting the elite Panaboard on a wall, refer to the following steps. When using a stand (sold separately), refer to the following steps and the Installation Manual for Model No.UB-T580/T580W. 4.1. Installation Requirements (1) The elite Panaboard is for indoor use.

  • Page 14: Included Accessories

    4.3. Included Accessories Confirm that the following items are included with the elite Panaboard.

  • Page 15: Wall Mounting Construction

    4.4. Wall Mounting Construction 4.4.1. Cautions for Wall Mounting Construction Which method should be used to mount the elite Panaboard (unit) depends greatly on the structure of the wall. The system to be mounted on the wall is heavy. Before proceeding with installation, therefore, consult with the building manager, maintenance engineer or designer to verify that the wall has a structure strong enough to support the weight of the system.
  • Page 16 4.4.3.3. Concerning the Screws and Bolts Used (1) When obtaining anchors and bolts locally, be absolutely sure that they satisfy the required specifications. (2) Use the values recommended by the manufacturer of the anchors used for the depth to which the anchors are to be embedded in the wall.

  • Page 17: Unpacking The Elite Panaboard From Its Packaging

    4.5. Unpacking the elite Panaboard from Its Packaging...

  • Page 18: Assembling The Elite Panaboard

    4.6. Assembling the elite Panaboard 4.6.1. For Wall Mounting 1. With the Cable Holders and Screws (3 each: No.6), fasten the USB Cable to wire the cable along the outer side of the elite Panaboard (clock wise or counterclockwise).
  • Page 19 2. With 4 screws (No.4), attach the 2 Pen Holders (No.4) to the 2 locations. Note: The attachment positions can be chosen from the 4 locations, as required. 3. Remove the 2 screws that secure the 2 Plate Covers. Then, while holding each of the Plate Cover, attach the 2 screws to the lower holes to secure the covers.
  • Page 20 4. Relocate the screw attachment position on both sides as illustrated so that elite Panaboard can be hung onto the Wall Mounting Plates on the wall. Note: Tightening Torque More than 1.2 N•cm (12 kgf•cm) 5. Remove the 5 screws to release the Upper Cover from the Panaboard.
  • Page 21 6. Hang the elite Panaboard onto the Wall Mounting Plates (No.2, No.3) on the wall. 7. With the M6 Bolts, Spring Washers (4 each WS2), and 4 Flash Washers (No.11), secure the elite Panaboard to the wall.
  • Page 22 8. Reassemble the Upper Cover. 9. Confirm that the elite Panaboard can operate. See 4.7 “Confirming the elite Panaboard Operation”. 10. Unplug the USB Cable from the PC to turn off the power. 11. Attach the Cable Clamp (7) to the left or right side of the Screen Plate Back.
  • Page 23 13. Wipe the screen board surface. Gently wipe the screen board surface with a soft, moist cloth.
  • Page 24 4.6.2. For Mounting on the Stand KX-B061 (Sold Separately) 1. Install the Stand. (See Installation Manual for UB-T580/T580W) 2. Fasten the USB Cable to wire the cable along the outer side of the elite Panaboard. (See 4.6.1-1.) 3. Attach the 2 Pen Holders (No.4) to the 2 locations.
  • Page 25 5. Hang the elite Panaboard on the Stand with the screw heads. 6. Secure the elite Panaboard to the Stand Frame using the 2 wing-bolts included with the Stand. 7. Confirm that the elite Panaboard can operate. See 4.7 “Confirming the elite Panaboard Operation”. 8.
  • Page 26 9. Attach the Cable Clamp (7) to the left or right side of the Screen Plate Back. 10. Bundle the USB Cable with the clamp (7). 11. Wipe the screen board surface. (See 4.6.1-13.)

  • Page 27: Confirming The Elite Panaboard Operation

    4.7. Confirming the elite Panaboard Operation Confirm that it operates properly by connecting the USB cable to a computer. 4.7.1. Confirming the Interactive Features 1. Install the elite Panaboard software. (Refer to the Operating Instructions for this model.) 2. Connect the USB cable to your PC. 3.

  • Page 28: Sectional View

    5 SECTIONAL VIEW...

  • Page 29: Screen Operation

    6 SCREEN OPERATION 6.1. Position Detection Mechanism Case 1: No obstacle is on an optical path 1. LEDs, which CMOS Camera Module (located on both sides of screenboard) has, emit light toward the screen. 2. When the light from the LEDs reaches the board fame, the light is reflected by the reflection tape attached around the inner side of the covers (Side Covers, Lower Covers), and then goes back to the original position.

  • Page 30: Maintenance

    7 MAINTENANCE 7.1. Maintenance Table The following table lists the symptoms that may result when they need to be replaced, cleaned, or serviced Item Symptom Type of Reference Maintenance Screen Board The surface of the Screen Board becomes dirty. Clean See 7.2.

  • Page 31: Disassembly Instructions

    8 DISASSEMBLY INSTRUCTIONS 8.1. Disassembly Flowchart The following flowcharts indicate disassembly sequence for the Exterior, Unit Components, and Circuit Board assemblies. When reassembling, perform the steps in the reverse order unless otherwise instructed in the Reassembling Notes.

  • Page 32: Exterior

    8.2. Exterior 8.2.1. Upper Cover (1) Remove the 5 screws on the top of the Upper Cover. (2) Pull the Upper Cover forward to remove the cover. 8.2.2. Upper Cover L (1) Remove the Upper Cover. (See 8.2.1.) (2) Demount the elite Panaboard (unit) from the wall. (Available only for wall-mounting installation) (3) Remove the 3 screws on the top of the Upper Cover L.
  • Page 33 (4) Remove the 3 screws with washers from the back. Then, pull forward and remove the Upper Cover L. (5) Disconnect the connector to the LED Board to release the Upper Cover L from the unit. (6) Mount the elite Panaboard to the wall, again. (Available only for wall-mounting installation)
  • Page 34 8.2.3. Upper Cover R (1) Remove the Upper Cover. (See 8.2.1.) (2) Demount the elite Panaboard from the wall. (Available only for wall-mounting installation) (3) Remove the 3 screws on the top of the Upper Cover R. (4) Remove the 3 screws with washers from the back. (5) Mount the elite Panaboard to the wall, again.

  • Page 35: Boards

    8.3. Boards 8.3.1. RELAY Board (on the left) (1) Remove the Upper Cover L. (See 8.2.2.) (2) Disconnect the 2 flat cables. (3) Remove the screw that secures the RELAY Board. 8.3.2. LED Board (1) Remove the Upper Cover L. (See 8.2.2.) (2) Remove the 2 screws that secures the LED Board.
  • Page 36 8.3.3. RELAY Board (on the right) (1) Remove the Upper Cover R. (See.8.2.3.) (2) Disconnect the 2 flat cables. (3) Remove the screw that secures the RELAY Board.
  • Page 37 8.3.4. CONTROL Board (1) Remove the Upper Cover. (See 8.2.1.) (2) Pull and remove the CONTROL Board's Cover. (3) Disconnect the 4 connectors (2 flat cable, 1 cable to LED Board, USB cable) (4) Remove the 3 screws that secure the CONTROL Board.

  • Page 38: Troubleshooting

    9 TROUBLESHOOTING 9.1. LED Status Symptom Possible Cause Check Point 1. The Status LED does The connection between elite Panaboard *1. Check the connection between the elite Panaboard and not light up. and PC is not proper. 2. Plug the USB cable to another USB interface on the PC The USB cable from the elite Panaboard 1.

  • Page 39: Error Message On Pc

    9.2. Error Message on PC Symptom Possible Cause Check Point 1. "elite Panaboard The connection between elite Panaboard *1. Check the connection between the elite Panaboard and could not be found. and PC is not proper. Confirm all 2. Plug the USB cable to another USB interface on the PC. connections."...

  • Page 40: Circuit Diagram

    10 CIRCUIT DIAGRAM 10.1. BLOCK DIAGRAM-1 (Processing) UB-T580 /T580W Block Diagram CMOS Camera Module RELAY CONTROL Board (Right) Board DC-DC Full 1173 PIC24FJ256 LED Board RELAY Board GREEN CMOS Camera Module Sens Sens Sens (Left) UP/DOWN Electronic Pen (Sold separately)

  • Page 41: Block Diagram-2 (Boards)

    10.2. Block Diagram-2 (Boards) CONTROL Board CMOS Camera RELAY Board Module (Right) CN300 CN301 CMOS Camera RELAY Board Module (Left CN300 CN301 LED Board CN200 From PC...

  • Page 42: Explanation Of Connector

    10.3. Explanation of Connector JK1 [CONTROL Board] - USB Peripheral Pin No. Signal Name Description VBUS VBUS Signal D- Signal D+ Signal Ground CN2 [CONTROL Board] - CN300 [RELAY Board] Pin No. Signal Name Description CN300 LEDKR LED Cathode LEDAR LED Anode 3.3V-S Switched 3.3V...
  • Page 43 CN3 [CONTROL Board] - CN300 [RELAY Board] Pin No. Signal Name Description CN300 LEDKL LED Cathode LEDAL LED Anode 3.3V-S Switched 3.3 V CLKL Clock for command input Ground RSTL CCD Reset RD2L CCD Read2 Select RD1L CCD Read1 Select ADRR[0] CCD Address 0 ADRR[1]...
  • Page 44 CN301 [RELAY Board] - CMOS Camera Module (Right) Pin No. Signal Name Description CN301 CMOS Camera Module (Right) No Connect No Connect LEDKL LED Cathode LEDAL LED Anode 3.3V-S Switched 3.3 V CLKL Clock for command input Ground RSTL CCD Reset RD2L CCD Read2 Select RD1L...

  • Page 45: Schematic Diagram

    11 SCHEMATIC DIAGRAM Index 11.1 RELAY Board 11.2 LED Board Note ･ The schematic diagrams are the latest at the time when this service manual is issued, but are subject to change without notice.

  • Page 46: Relay Board

    11.1. RELAY Board...

  • Page 47: Led Board

    11.2. LED Board...

  • Page 48: Circuit Boards

    12 CIRCUIT BOARDS Index 12.1 RELAY Board 12.2 LED Board...

  • Page 49: Relay Board

    12.1. RELAY Board RELAY 94V-0 PNLB2086ZB-WK PNLPUBT580QMM-B to CCM to Control 12.2. LED Board 12.2.1. Front Side CN200 94V-0 PNLB2086ZB-WK RM200 D200 PNLPUBT580QMM-C 12.2.2. Back Side...

  • Page 50: Parts Location And Mechanical Parts List

    13 PARTS LOCATION AND MECHANICAL PARTS LIST...

  • Page 51: Exterior

    13.1. Exterior 13.1.1. For UB-T580 22 300 22 300 32 23...
  • Page 52 Safety Ref. No. Part No. Part Name & Description Remarks PNKV1148Z Corner Cover L ISO:PS PNGR1002X Reflection Tape Corner PNKV1147Z Corner Cover R ISO:PS PNKV1149Z Under Cover ISO:PS PNGR1003V Reflection Tape Under PNKV1146Z Side Cover ISO:PS PNGR1001W Reflection Tape Side PNWD1004Z LED Harness PNWP580S1M...
  • Page 53 13.1.2. For UB-T580W To be continued later...

  • Page 54: Packing

    13.2. Packing 13.2.1. For UB-T580...
  • Page 55 Safety Ref. No. Part No. Part Name & Description Remarks PNYK580S0M Upper Carton for UB-T580 PNYK580S0C Upper Carton for UB-T580-C PNYK580S0T Upper Carton for UB-T580-T PNYK580S0U Upper Carton for UB-T580-U PNYK580S0G Upper Carton for UB-T580-G PNYK580S0A Upper Carton for UB-T580-A...
  • Page 56 13.2.2. For UB-T580W To be continued later...

  • Page 57: Replacement Parts List

    14 REPLACEMENT PARTS LIST...

  • Page 58: Relay Board

    14.1. RELAY Board Safety Ref. No. Part No. Part Name & Description Remarks CN300 K1MN22BA0109 Connector CN301 K1MN24BA0112 Connector 14.2. LED Board Safety Ref. No. Part No. Part Name & Description Remarks C200 F1K1E1060004 C201 F1K1E1060004 C202 ECUV1H104ZFV C204 ECUV1H104ZFV CN200 K1KA06BA0014 Connector...

This manual is also suitable for:

Ub-t580w

Table of Contents