Setting the Password
To prevent third parties from operating the unit, it is
possible to set the unit to require a password to be
entered when the power is turned on or after a certain
period of time has passed.
Press the Set-up Key
1
• The set-up screen is displayed.
2
Press the Set-up Key (
the following item.
Press the Advance Key (
3
If the password has already been set, enter the
4
4-digit password.
Press the Advance Key (
5
select
(Password on) or
.
) repeatedly to select
).
) repeatedly to
(Password off).
Press the Set-up Key (
6
password settings.
• If the password setting has been set to "off",
the unit will return to standby mode.
• If the password setting is set to "on", proceed
to perform the following operations.
Press the Advance Key (
7
interval of time after which the password will
need to be entered.
• The interval for entering the password can be
selected from 15 minutes / 30 minutes /
1 hour / 2 hours / 4 hours / 8 hours.
Press the Set-up Key (
8
interval for entering the password.
When the password input display appears,
9
press the Mode Key (
(
), or the Advance Key (
new 4-digit password and return to standby
mode.
Note
• Do not forget the Password.
If you forget the Password, call your dealer.
Setting the Unit
) and determine the
) and set the
) and determine the
), the Set-up Key
) to enter the
27