Setting the Unit
The following settings can be made using the control
panel.
Note
• The item "Setting the number of copies" is displayed
at the top of the set-up menu only when the printer is
connected.
Setting the number of copies
It is possible to set the number of copies (1 to 9) when
making multiple copies with a printer.
1
Press the Set-up Key
• The set-up screen is displayed and the
multiple copy setting for printers is selected.
Press the Advance Key (
2
select the desired number of copies.
Press the Mode Key (
3
mode.
Note
• Scanning can be started immediately by
pressing the Start/Stop Key instead of the
Mode Key (
24
.
) repeatedly to
) to return to standby
).
Setting for scanning time
display
It is possible to select whether the time that an image is
scanned is displayed on the image.
Electronic
Board
[On]
Press the Set-up Key
1
• The set-up screen is displayed.
Note
• The item "Setting the number of copies" is
displayed at the top of the set-up menu only
when the printer is connected.
Press the Set-up Key (
2
the following item.
Electronic
Board
[Off]
.
) repeatedly to select