Input Signal; Adjusting The Angle; Adjusting The Size; Adjusting The Focus - Panasonic PT-LM2E Operating Instructions Manual

Press the input select button to select the
&

input signal.

Input select
buttons
Changing
signals
BA picture will be projected in accordance with the selected input
signal.
BWhen a YP
instead of "RGB".
Follow the procedure below when you set the projector up first, and when
you change the setup place.

Adjusting the angle

'
BWhile pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
Press the AUTO SETUP button to initiate
(
automatic positioning.
BThe tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 26 for details.)

Adjusting the size

)
BTurn the zoom ring to adjust the size of the projected image.

Adjusting the focus

*
BTurn the focus ring to adjust the focus of the projected image.
RGB VIDEO
S-VIDEO
P signal is being input, "YP
B R
VIDEO
VIDEO
RGB
S-VIDEO
P " will be displayed
B R
AUTO SETUP
E
NGLISH
RGB
-23