Connector Panel - Panasonic PT-LM2E Operating Instructions Manual

Connector panel

#
# Menu operation (on connector panel) (page 14)
$ RGB IN connector (pages 19 and 20)
This connector is used to input RGB signals and YP
% S-VIDEO IN connector (pages 20 and 39)
This connector is used to input signals from a S-VIDEO-compatible
equipment such as a video deck. The connector is S1 signal compatible,
and it automatically switches between 16:9 and 4:3 aspect ratios in
accordance with the type of signal being input.
& VIDEO IN jack (page 20)
This jack is used to input video signals from a video equipment such as a
video deck.
' AUDIO IN L-R jacks (pages 19 and 20)
( Power input socket (AC IN) (page 22)
The accessory mains lead is connected here.
Do not use any mains lead other than the accessory mains lead.
) Security lock
This can be used to connect a commercially-available theft-prevention
cable (manufactured by Kensington). This security lock is compatible with
the Microsaver Security System from Kensington.
16-E
NGLISH
$
(
% & '
)
P signals.
B R