Konica Minolta bizhub c550 Quick Manual page 7

Power cord
WARNING
• Use only the power cord supplied in the package. If a power cord is not sup-
plied, only use the power cord and plug that is specified in POWER CORD
INSTRUCTION. Failure to use this cord could result in a fire or electrical
shock.
• Use the power cord supplied in the package only for this machine and NEV-
ER use it for any other product. Failure to observe this precaution could re-
sult in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on,
or damage the power cord. Use of a damaged power cord (exposed core
wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power
switch, unplug the power cord from the power outlet, and then call your au-
thorized service representative.
Power source
WARNING
• Use only the specified power source voltage. Failure to do that could result
in a fire or electrical shock.
• Connect power plug directly into wall outlet having the same configuration
as the plug. Use of an adapter leads to the product connecting to inade-
quate power supply (voltage, current capacity, grounding), and may result in
fire or shock. If proper wall outlet is not available, the customer shall ask
qualified electrician for the installation.
• Do not use a multiple outlet adapter nor an extension cord in principle. Use
of an adapter or an extension cord could cause a fire or electrical shock.
Contact your authorized service representative if an extension cord is re-
quired.
• Consult your authorized service representative before connecting other
equipment on the same wall outlet. Overload could result in a fire.
CAUTION
• The outlet must be near the equipment and easily accessible. Otherwise you
can not pull out the power plug when an emergency occurs.
x-6 C550