Accessories; Standard Accessories; Optional Accessories - Hitachi H 65SD3 Instruction Manual

English
WARNING
ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts
or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it
is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Molded plastic) (Code No. 339664).........1
OPTIONAL ACCESSORIES ...... sold separately
(1) Bull Point...for demolitioning
Overall Length
16-9/64" (410 mm)
20-15/32" (520 mm)
(2) Cold chisel...for groove digging and edging
Overall Length
16-9/64" (410 mm)
20-15/32" (520 mm)
(3) Cutter...for asphalt + cutting
Overall Length
16-9/64" (410 mm)
20-15/32" (520 mm)
12

ACCESSORIES

(4) Scoop...for scooping work
Code No.
996372
985230
(5) Hammer Grease A
Code No.
996373
NOTE
985231
Code No.
996374
985232
Overall Length
21-1/2" (546 mm)
1.1 lbs (500 g) (in a can) (Code No. 980927)
0.15 lbs (70 g) (in a tube) (Code No. 308471)
0.07 lbs (30 g) (in a tube) (Code No. 981840)
Specifi cations are subject to change without any
obligation on the part of the HITACHI.
Code No.
985233