Example Of Connecting With Pcs - Panasonic PT-L6510U Operating Instructions Manual

Example of connecting with PCs

PC with
DVI port
DVI Cable (Option)
(ET-SCDV03)
IN
S-VIDEO IN VIDEO
R/R-Y/P G/Y
R
IN
IN
S-VIDEO IN VIDEO
R/R-Y/P G/Y
R
IN
Caution
• When the projector's main power is turned OFF, also turn OFF all the PCs connected to it.
• *1 An asterisk denotes that the second projector requires positioning if the RGB outputs are connected in a
daisy chain. However, the signals should be divided at the signal source if possible.
Note
• If your PC is not equipped with a USB port, a ET-RMRC1 interface will be needed to use the mouse capability
of the remote control.
• For the specifications of the RGB signals that can be applied from the PC, see the data sheet on page 48.
• If your PC has the resume feature, the computer may not function properly until the resume capability is
disabled.
• Signals applied to the RGB1 or RGB2 ports appear at the RGB OUT port.
PC with
USB port
OUT L R
IN OUT
RGB
AUDIO IN AUDIO AUDIO
B/B-Y/P SYNC/HD VD
B
RGB 1 IN
OUT
DVI-D
OUT L R
IN OUT
RGB
AUDIO IN AUDIO AUDIO
B/B-Y/P SYNC/HD VD
B
RGB 1 IN
OUT
DVI-D
PC
USB cable
(Accessory)
IN
IN OUT
USB SERIAL
RGB 2 IN RGB OUT REMOTE
* 1
IN
IN OUT
USB SERIAL
RGB 2 IN RGB OUT REMOTE
Control PC
IN
OUT
WIRED
> PC < TBMU152
IN
OUT
WIRED
> PC < TBMU152
Color monitor with
RGB video ports
21