Aspect ratio is adjustable only for composite video,
S-video, or YP
signals complying with the NTSC
(480i or 480p) or PAL (625i) standards.
[AUTO]: (S-video only)
If an S1 video signal is applied to the S-VIDEO
port, the picture is automatically switched to
the 16:9 aspect ratio.
[16:9]: The image is vertically compressed into a 16:9
[4:3]: The aspect ratio inherent to the input video signal
is left intact when projected onto the screen.
[S4:3]: Picture size is compressed to 75% of the
original picture size when projected. (This
mode is useful when viewing pictures with the
standard 4:3 aspect ratio on a wide screen
with the 16:9 aspect ratio.)
What Is S1 Video?
• The S1 video is the wide-aspect-ready S-video format
containing an aspect sense signal for squeezed videos fed
from video equipment.
• If "AUTO" is chosen, the projector automatically compresses
the squeezed input video into the 16:9 aspect ratio if it detects
the aspect sense signal.
• If you choose an aspect ratio that does not match
the source video's aspect ratio, you will see a picture
with an aspect ratio not the same as that of the
original picture. Choose the appropriate aspect ratio
carefully to match that of the original picture.
• If the picture size is compressed or enlarged by
using the 16:9 aspect ratio when the projector is
used for profitable purpose or in the presence of
an audience (for example, in a coffee shop or at
a hotel etc.), it may infringe the rights of the
copyright owner of the original picture.
• If a picture with the standard (4:3) aspect ratio is
projected at a wide aspect ratio, parts of the picture
may run over the screen bounds or the overall picture
may be distorted. To view the picture at its original
aspect ratio, choose the standard 4:3 aspect ratio.
Pressing the "ENTER" button resets parameter
values for all the menu items to the factory default,
with a "STANDARD" indicator shown in the upper right
corner of the menu.
16 : 9
4 : 3
S 4 : 3
Adjusting the Zoom/Focus
"ZOOM" is used to adjust projected picture size.
button: Increases picture size.
button: Reduces picture size.
When the picture size reaches the upper or lower
limits, the color of the arrows on the four corners will
change from light blue to red.
"FOCUS" is used to adjust picture focus with the
Changing the display language
1. Highlight the desired language with the
buttons (on the projector or
2. Press the "ENTER" button to enter your
Menus, setting items, adjustment screens, and control
button names will be displayed in the language the
The available languages are:
English, Deutsch, Français, Español, Italiano,
• The projector's on-screen display is set to the
English language by default.
Currently chosen language
is displayed here.