Back Color; On-Screen Display Setting - Panasonic PT-DW100U Operating Instructions Manual

SDI SIGNAL LEVEL
Set to match the dynamic range (black-to-white)
of the input signals. This is only valid when YP
and RGB input of HD-SDI. The setting will change
as follows each time the button is pressed.
64-940
• 64-940:
Default: Black level defined as 64, White level as
940
• 4-1019:
Set this when gray appears black.

On-Screen display setting

The user can specify the on-screen display.
Press ▲▼ to select
1.
"ON-SCREEN DISPLAY".
AUX SDI IN
ON-SCREEN DISPLAY

BACK COLOR

2. Press ENTER.
• The "ON-SCREEN DISPLAY" screen will be
displayed.
ON-SCREEN DISPLAY
OSD POSITION
OSD DESIGN
Press ▲▼ to select the desired
3.
item, and press ◄► to change
the setting.
OSD POSITION
This sets the position of the on-screen display
(OSD).
1 (Top left of the
screen)
9 (Bottom right of
the screen)
8 (Right center of
the screen)
7 (Top right of the
screen)
P
B R
4-1019
BLACK
2
1
2 (Left center of the
screen)
3 (Bottom left of the
screen)
4 (Top center of the
screen)
5 (Center of the
screen)
6 (Bottom center of
the screen)
OSD DESIGN
This sets the color of the on-screen display (OSD).
1
6
5
• : 1
Displayed in yellow.
• 2:
Displayed in blue.
• 3:
Displayed in white.
• 4:
Displayed in green.
• 5:
Displayed in pink.
• 6:
Displayed in brown.
OSD MEMORY
The current menu cursor position will be retained
when you return to the page.
OFF
INPUT GUIDE
This sets whether to display the currently selected
input terminal name at the position set for "OSD
POSITION".
OFF
WARNING MESSAGE
This sets the display of warning messages.
OFF
Back Color
This sets the color for the projection screen when no
signals are being input.
Press ▲▼ to select "BACK
1.
COLOR".
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
2
3
4
ON
ON
ON
BLACK
LOGO3
ENGLISH – 73