Adjusting The Picture; Switching The Picture Mode; Adjusting Contrast - Panasonic PT-DW100U Operating Instructions Manual

Adjusting the picture

MENU
You can adjust pictures to suit your preference.
MENU
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
• Some menu items may not be valid for certain
signal formats applied to the projector.
52 – ENGLISH
▲▼◄►
ENTER
DEFAULT
Press to display the MAIN
MENU screen.
Press to select
"PICTURE".
Press to display the
"PICTURE" menu.

Switching the picture mode

The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select "PICTURE
1.
MODE".
PICTURE
PICTURE MODE
CONTRAST
Press ◄► to switch "PICTURE
2.
MODE".
• The setting will change as follows each time
◄► is pressed.
STANDARD CINEMA
USER GRAPHIC
• STANDARD:
The picture becomes suitable for moving images in
general.
• CINEMA:
The picture becomes suitable for movie sources.
• NATURAL:
The picture complies with sRGB.
• DYNAMIC:
The light output is maximized for use in bright
areas.
• GRAPHIC:
The picture becomes suitable for input from to the
personal computer.
• USER:
The COLOR TEMPERATURE and GAMMA settings
can be adjusted.
Note
• Factory defaults are "GRAPHIC" for RGB system
and "STANDARD" for moving images.
• When ENTER is pressed while "PICTURE MODE"
has been selected, the current Picture Mode page
settings are saved and will be used as the presets
when new signals are input. The data will be saved
for all items in the PICTURE menu except for the
SYSTEM SELECTOR setting.

Adjusting Contrast

Adjusts the Contrast (white level).
Press ▲▼ to select
1.
"CONTRAST".
PICTURE MODE
CONTRAST
BRIGHTNESS
STANDARD
0
NATURAL
DYNAMIC
STANDARD
0
0