Monitor Lamp Indicators - Panasonic PT-D5000E Operating Instructions Manual

 FILTER indicator
The FILTER indicates the Auto Cleaning Filter (ACF) unit status.
Lamp
Information
indication
Lighting in red The ACF unit has run out.
The ACF unit is not
Blinking in red
*1
installed.
The ACF unit remains
few. The remaining use
Lighting in
time of the ACF unit is
orange
approximately
200 hours.
Blinking in The ACF unit cannot
orange operate properly.
*1. When the ACF unit is not installed, the filter indicator will blink in red and the power will turn off.
*2. 200 hours is the roughly guided time.
NOTE:
• When the FILTER indicator is flashing green, the Auto Cleaning Filter (ACF) is normally rolling up.
• When the ACF unit is operating, operational sound may be heard.
• In a dusty environment, the guided remaining use time will be shorter. Contact the dealer to purchase the new ACF unit earlier.
• If using the projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level and HIGH ALTITUDE MODE in PROJECTOR SETUP
menu is OFF, it may cause malfunction of the ACF unit.
• Before the FILTER indicator blinks in orange when operational malfunction, mechanical sound of the clutch may be heard.
Check point
• Check the REMAINING FILTER
of STATUS in PROJECTOR
SETUP menu.
• Check the ACF unit
compartment.
• Check the REMAINING FILTER
of STATUS in PROJECTOR
SETUP menu.
*2
• Is foreign object blocking the
ACF unit operation?

Monitor Lamp indicators

Remedial measure
• Replace the ACF unit.
• Replace the ACF unit.
• Request the dealer to purchase the new
ACF unit.
• Remove the foreign object from the ACF
unit.
• When the foreign object still remained,
contact the dealer.
E
NGLISH - 29