Ceiling Mount Bracket Safeguards - Panasonic PT-D5000E Operating Instructions Manual

Technical Information

Ceiling mount bracket safeguards

The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable
provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for
safety and security.
 Installation work of the ceiling mount bracket should only be carried by a qualified technician according to
the following procedure.
 Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by
using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental
conditions.
 Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
 An unused ceiling mount bracket should be removed promptly by qualified technician.
 Do not use other than the provided safety cable (x1) and washers (x2).
 Do not use the screw holes of the front leg adjusters for the projector installation.
 Do not attach the safety cable to the burglar hook port and suspend the projector on it.
 Read the installation instructions booklet that is provided with the ceiling mount bracket to install the safety
cable.
 Attachment procedure
1. Turn the projector upside down and place it gently on a
soft cloth.
2. Turn one of the front leg adjuster counterclockwise to
remove from the projector.
3. Insert the front leg adjuster through the ring of the
washer.
4. Place the front leg adjuster through the loop of the
safety cable.
5. Attach the front leg adjuster to the projector by turning
clockwise, and then tighten up the front leg adjuster
securely.
6. Pull the safety cable outward toward the ceiling.
Ceiling mount
E
NGLISH - 38
Please also attach
the washer which is
additional accessory
to the ceiling mount.
Washer
Front leg adjuster
Front leg adjuster
Front leg adjuster
Washer
Washer
Safety cable
Safety cable