Audio Adjustments
Introduction of audio
adjustments
By carrying out the following settings/adjust
ments in order, you can create a finely tuned
sound field effortlessly.
1 Using the position selector
2 Selecting a cut off frequency
3 Auto TA and EQ (auto time alignment and auto
equalizing)
Operating the audio menu
1
1 Audio display
Shows the audio function names.
% Touch A.MENU and then touch AUDIO
to display the audio function names.
The audio function names are displayed and
operable ones are highlighted.
# When A.MENU is not displayed, you can dis
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION, AUTO EQ and AUTO TA will be can
celled.
# When playing discs recorded with more than
96 kHz sampling frequency, audio is output from
front speaker only.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re
turned to the source display.
Section
14
65
En