Understanding Auto Ta And Eq Error Messages - Pioneer AVH-P7550DVD Operation Manual

Additional Information

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears on the dis
play refer to the table below to see what the problem is and the suggested method of correcting
the problem. After checking, try again.
Message
Error check MIC
Error check front SP, Error
check FL SP, Error check FR SP,
Error check center SP, Error
check RL SP , Error check RR SP ,
Error check subwoofer
Error check noise
Cause
Microphone is not connected.
The microphone cannot pick up the
measuring tone of any speaker.
The surrounding noise level is too
high.
Action
Plug the supplied microphone securely into
the jack.
! Confirm that the speakers are connected
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Set the microphone correctly.
! Stop your car in a place that is as quite as
possible, and switch off the engine, air condi
tioner or heater.
! Set the microphone correctly.
Appendix
91
En