To Play Back Bonus Groups; Setting Remote Control Code Type - Pioneer AVH-P7550DVD Operation Manual

Setting up the DVD
player
4 Touch c or d to select the desired level.
The parental lock level is set.
! 8  Playback of the entire disc is possible
(initial setting)
! 72  Playback of discs for children and
non adult oriented discs is possible
! 1  Playback of discs for children only is
possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack
age, included literature or on the disc itself.
With discs that do not feature a recorded par
ental lock level, you cannot use parental lock.
! With some discs, parental lock operates to
skip certain scenes only, after which normal
playback resumes. For details, refer to the
discs instructions.
Changing the level
You can change the set parental lock level.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 09 to input the registered code
number.
3 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon is displayed. Touch C and input the cor
rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.
4 Touch c or d to select the desired level.
The new parental lock level is set.
If you forget your code number
Refer to Changing the level on this page, and
touch C 10 times. The registered code number
is canceled, letting you register a new one.

To play back bonus groups

Some DVD audio discs have an extra bonus
group that requires a four digit password to
access. See the disc packaging for details and
the password. When you try and play the
bonus group, the password input screen will
automatically appear.
! The bonus group can be played back after
the password has been entered until the
disc is removed from the unit.
1 Touch SETUP and OTHERS and then
touch BONUS GROUP.
2 Touch 09 to input a four digit pass-
word.
# If you input an incorrect password, touch C
and then input the correct password.
3 While the input number is displayed,
touch ENTER.
Setting remote control
code type
When the remote control operation switch is
set to DVD, changing the remote control code
type enables you to operate the Pioneer DVD
player by the supplied remote control. There
are three remote codes, code type A, code
type B and code type AVH. When using this
unit with a multi DVD player (e.g. XDV P9), se
lect code A. When using this unit only, select
code AVH.
! With this unit, code B cannot be used.
Section
15
79
En