Duress; Lcd Keypad Programming; Quick Commands; Multi-Parfifion [#O] - FBII XL-4B Hookup And Installation Instructions

The three keypad @ndtiions csn be initiated as follows;
CONDITION
KEYSTROKES
1
*+#
2
1+*
3 3+#
4
Musmmss
MSET
3+1
Note: + indicates the simukaneous depression of the two keys shown. For example, 3 +# indcates
pressing the 3 and # keys at the same time.
6.18.
DURESS/AMBUSH
The XL-4 contains duress capability which can be obtained through use of a user mde with an
authorization Ievelof 6. The duress feature will reporf to the Central Station based on the parameters
defined as keypad condition number 4.
6.19.
LCD KEYPAD PROGRAMMING MODE
Installer programming can be performed through an LCD keypad to view or mdify the
programmable characteristics of the mntrol panel. Entry into this mde will obtain numbered dsplays
correspon~ng to the programming questions. Wthin the programming mode the installer can scroll
through the questions sequentially or directly access any question. Full details on keypad
programming can be found in the XL-4 LCD Keypad Programming manual.
6.20.
QUICK COMMANDS
The XL-4 contains some quick command functions wtich can be enabled or disabled through the
programming sequence. These commands can be intiiated by :he end user through depression of
the # key followed by the command numbar as shown below;
-FN~F
#o Muti-Patition Mode.
#1
Quick Arming
#2
Quick Forced Arm
#3 Time/Date Set *
#4 LCD Zone Directo~'
#5 Quick Bypass
#6
Chime OtiOff
#7 User Parftion Assignment.
*LCD Keypads On&
NOTE: Each of the quick arming commands can be enabled or disabled through programming
options.
6.20.1
MULTI-PARTITION [# 0].
The XL-4 can be configured to appear as mutiple separate security systems. Each su~roup is
known as a partition and users can be vatid in different paflitions. Each partition would wntain their
own zones and keypads and would normally be operated independently. NOTE: The muti-partiioned
mode is not permitted within UL Listed systems,
The muti-partition mode allows authorized usere to perform functions to their assigned pa~tion
from any keypad within the entire system. To enter the muti-patition mode enter # Ofollowed by a
vafld user rode. the user will only be able to perform the functions authorized for that user.
XL-4 HOOKUP & INSTALLATION Page 32