Hard Floor Cleaning - Bissell powerforce 76R9 SERIES User Manual

O
perations

Hard floor cleaning

(included on select models only)
1. Remove the collection tank (refer to steps
2a and b in the "empty the collection tank"
section on page 6)
2. attach the hard floor tool by hooking it
into the front of the removable nozzle and
swinging it down until the tabs pop into
place.
3. Replace the collection tank. be sure to
attach the two latches.
4. fill solution tank with bissell 2X hard
floor solutions
the rest of the tank with hot (not boiling)
tap water to the WateR fill line. Replace
and tighten the black cap.
5. follow steps 1-7 under "carpet cleaning"
on page 6 to continue cleaning.
w w w . b i s s e l l . c o m
to foRmula fill line. fill
™
2.
WARNING:
to reduce the risk of fire and
electric shock- when cleaning
a hard floor, the bissell hard
floor tool (203-5639) must
be used and it must only be
used with bissell 2X hard
floor solutions cleaning fluid
intended for use with this
appliance.
8 0 0 . 2 3 7 . 7 6 9 1
7