Cleaning Hard Floors - Bissell POWERFRESH SANITIZE PROFESSIONAL 1979H Manual

Cleaning Hard Floors

NOTE: Thoroughly sweep or vacuum floor prior to cleaning with your steam mop.
Your steam mop is designed to clean hard flooring such as ceramic tile, laminate, marble, stone,
and sealed hardwood floors. Use of your steam mop on waxed or some unwaxed floors may result
in a diminished glossiness. The steam mop is not for use on unsealed floors. For best results, test
in an inconspicuous area and check the care instructions from your flooring manufacturer. Don't
stand stationary and keep the mop moving when dispensing steam.
1
2
Step on the back of the foot
to recline the body of the
machine to begin cleaning.
NOTE: Your steam mop may have already come assembled with a mop pad on the foot.
If not, refer to instructions on page 6 in the "Attaching Microfibre Mop Pads" section to
learn how to attach the mop pad.
NOTE: For overly challenging and stuck-on messes, step on the release pedal located
on the back of the machine and lift up to use the SpotBoost Brush. See page 7. When
removing the foot, make sure to lift it away from your body as the bottom of the brush
will release steam.
3
x3
Plug the machine into a
properly grounded outlet.
Once the blinking READY
light turns solid, press the
power button. Next select
the appropriate steam level.
Pull on-demand steam
trigger to release steam
as desired.
For best results to sanitise
an area of your floor, use the
microfibre cloth pads and slowly
and evenly move your steam
mop back and forth at least
three times over the area using
continuous steam.
When finished, turn the machine
off by pressing the power button
and unplugging the machine.
NOTE: For best results, remove
the pad and wash after use.
BISSELL.com 9