Machine Storage; To Install The Replacement Brush Belt - Bissell powerforce 76R9 SERIES User Manual

M
aintenance and care

Machine storage

1. Wrap power cord around Quick
Release cord Wrap
machine.
2. Wipe all surfaces with a soft cloth.
store cleaner upright in a protected,
dry area.
NOTE: You may have cleaning
solution remaining in the
solution tank. You may store your
machine this way for the next
cleaning task, but never keep dirty
water in the collection tank.
To install the replacement
brush belt
1. turn the machine off and unplug from
wall outlet.
2. Remove solution and collection tanks.
3. lie machine down to access the
bottom of the machine.
4. With a Phillips head screwdriver,
unscrew the brush cover and remove.
5. Remove the brush end cap and remove
belt from brush.
6. brush can now be removed.
7. belt can be removed by sliding off the
motor pulley.
8. clean or replace belt. attach belt to
motor pulley and brush, insert brush
into right side end cap.
9. Reattach the left end cap and slide
brush back into place.
10. Replace the brush cover and screw
into place.
8
w w w . b i s s e l l . c o m
on side of the
™
WARNING:
To reduce the risk of injury
from moving parts and/or
electrical shock, turn power
switch OFF and disconnect
plug from electrical outlet
before performing mainte-
nance or troubleshooting
checks.
CAUTION:
Do not store unit where
freezing may occur.
Damage to internal
components may result.
Brush Cover
4.
5.
6.
8.
8 0 0 . 2 3 7 . 7 6 9 1
5a.
7.
9.