Table of Contents
Advertisement
MUST BE INSTALLED BY CERTIFIED INSTALLER
To plug the thermostat, unscrew the junction box on the side of the
furnace. Join the black wire of the thermostat with another one of the
junction box, and then insulate them with a wire nut. Join the white wire of
the junction box and another one of the thermostat, and then insulate
them with a wire nut. Reinstall the junction box on the furnace.
THE THERMOSTAT MUST BE INSTALLED BY
A CERTIFIED INSTALLER OR ELECTRICIAN.
L160 AND F120 THERMODISC LOCATION.
Thermodisque L160
L160 Thermodisc
The L160 snap disk box must be installed onto the duct section from the plenum far as possible with the length of
cable include. You need to drill 7/8 inches hole into the duck section to let the L160 snap disc be in contact with
the air in duct. Attach the box with two metal screws. To install it on round section, install it along the length way
not across the section.
September 13, 2016
Junction Box
Boite de jonction
(Thermostat)
Electric Box
Boite électrique
To not include mechanical
wall thermostat/
Vers le thermostat
mécanique au mur
non inclut
Thermodisque F120
F120 Thermodisc
16
Advertisement
Table of Contents
