Table of Contents
Advertisement
INSTALLATION OF THE FIREBRICKS
Installation of the firebricks
Use the round bricks support and the hex head screw to secure the bricks on the interior wall of
the furnace.
1. Install the bricks in the bottom of the stove (horizontal)
12 x Bricks A, 2 x Bricks F, 1 x Bricks E
2. Install the bricks against both lateral walls.
8 x Bricks A, 6 x Bricks D
3. Install the Bricks against the rear wall (vertical)
4 x Bricks A, 4 x Bricks E
4. Install the 3 pipes in the rear of the stove and install the first row of bricks on the pipes.
4 x Bricks A
5. Split the wool in the shortest length direction about 12 inches long if it is not already
done. Insert the wool above the pipes and the bricks so that the slot is oriented to the
front of the stove. (See figure 1)
September 13, 2016
12
Advertisement
Table of Contents
