Auto High Beams (Ahb) - Toyota PRIUS C 2016 Quick Reference Manual

TOYOTA SAFETY SENSE

Auto High Beams (AHB)

(1)
The AHB uses an in-vehicle camera sensor to assess the brightness of streetlights,
the lights of oncoming and preceding vehicles, etc., and automatically turns high
beam on or off as necessary.
Activating the Automatic High Beam (AHB) system
(1) With the engine switch in IGNITION ON mode and headlight switch turned to
"ON" position, push lever away from you.
(2) Depress the Automatic High Beam "AUTO" switch.
The AHB indicator will come on when the headlights are turned on
automatically to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off and the high beam indicator turns on.
Conditions where Automatic High Beams will turn ON/OFF automatically
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
turned on.
If any of these conditions occur, high beams will be automatically turned off:
turned on.
(2)
30