Automatic High Beams (Ahb) - Toyota VENZA 2022 Quick Reference Manual

TOYOTA SAFETY SENSE

Automatic High Beams (AHB)

(1)
The Automatic High Beams (AHB) safety system is designed to help you see
more clearly at night. At speeds above 25 mph, AHB can detect the headlights of
oncoming vehicles and taillights of preceding vehicles, then automatically toggles
between high and low beams accordingly.
See www.toyota.com/safety-sense for more information.
Refer to the Toyota Owner's Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
ACTIVATING THE AHB SYSTEM
(1) Press the "
(2) Turn the headlight switch to the the "AUTO" or "
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Push the lever away from you to manually turn on high beams. Press the
AHB switch to turn the AHB system off.
The AHB indicator will turn off and "
system again, pull the lever its original position or press the "
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of the following conditions are met, the high beams will be automatically
turned on (after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h) or more.
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or taillights turned
on.
• There are few streetlights on the road ahead.
If any of the following conditions occur, the high beams will be automatically turned off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or taillights turned on.
• There are many streetlights on the road ahead.
" switch.
™
(2)
" or " " will turn on. To activate the
50
" position.
" switch.