Konica Minolta bizhub proc6500 User Manual page 47

3
4
Select A3 w/11" × 17" w paper, place the original of which a misalign-
ment can be easily monitored on the original glass, then press [START].
5
Check the misalignment by comparing the original and the output.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
The Scanner Restart Timing Adjustment Screen will be restored.
7
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -10 to +20, 1 step = 0.1 mm
8
Repeat the adjustment steps from 3 to 7 until the desired result is ob-
tained.
9
Touch [Return] to restore the Adjustment Menu Screen.
3-14
Adjustment
bizhub PRO C6500