Toyota 2009 4runner Owner's Manual page 496

6-1. Specifications
Lubrication system
Oil capacity
drain and refill
(Reference)
4.0 L V6 (1GR-FE) engine
4.7 L V8 (2UZ-FE) engine
Oil grade
Recommended oil
viscosity
*: 5W-30 is an oil that provides optimal levels of fuel efficiency.
Oil viscosity
l The 5W portion of the oil viscosity rating indicates the characteristic
of the oil which allows cold startability. Oils with a lower value before
the W allow for easier starting of the engine in cold weather.
l The 30 in 5W-30 indicates the oil viscosity when the oil is at its
operating temperature. An oil with a higher viscosity may be better
suited if the vehicle is operated at high speeds, or under extreme
load condition.
474
With filter
5.5 qt. (5.2 L, 4.6 Imp.qt.)
Without filter
5.2 qt. (4.9 L, 4.3 Imp.qt.)
With filter
6.5 qt. (6.2 L, 5.5 Imp.qt.)
Without filter
6.0 qt. (5.7 L, 5.0 Imp.qt.)
ILSAC multigrade engine oil
Use Toyota approved "Toyota Genuine
Motor Oil" or equivalent to satisfy the grade
and viscosity shown below.
Outside temperature