The Radio: Preset Tuning; Presetting Radio Stations; Selecting Channels - Panasonic RX-EX1 Operating Instructions Manual

14
RQT5671
Y
PLAY RE FADER SLEEP EQ ON
- REC
1 REC ALL 1 ST
PGM
RANDOM MONO
PLAY RE FADER SLEEP EQ ON
- REC
1 REC ALL 1 ST
PGM RANDOM MONO
PLAY RE SLEEP
FADER EQ ON
1 ALL 1 - REC
REC ST
PGM RANDOM MONO
Preset channel
PLAY RE FADER SLEEP EQ ON
- REC
1 REC ALL 1 ST
PGM RANDOM MONO
PLAY RE SLEEP
FADER EQ ON
1 ALL 1 - REC
REC ST
P P G G M M RANDOM MONO
PLAY RE FADER SLEEP EQ ON
1 ALL 1 - REC
REC ST
P P G G M M RANDOM MONO

The Radio: preset tuning

Presetting radio stations

Remote control only
Tuning is simpler if you preset stations.
You can preset 12 FM and 12 AM stations.
Preparation: Tune to the station you want to preset. (
page 13)
Press [
PGM/ CLEAR
While " " is flashing
Press the numbered buttons to enter the
station into a channel (1 to 12).
•To enter channels 10, 11, and 12
Press [ 10], then the two digits.
•If "
" stops flashing
Press [ PGM/ CLEAR ] again.

Selecting channels

Preparation: Press [TUNER BAND] to select FM or AM.
Press [TUNE MODE] to display "
Press [REW/–/ ] or [
channel.
On the remote control
Press the numbered button(s) to select the channel (1 to 12).
To select channel 10, 11 or 12, press [ 10], then the two digits.
Using preset scan
You can search for a station by listening to all preset
channels for 8 seconds each.
Main unit only
Preparation: Press [TUNE MODE] to display "
Press and hold [REW/–/
1
until "PS" appears on the display.
Preset scan starts.
Press [REW/–/
2
find the desired channel.
Preset scan ends after searching through each preset
channel once.
To stop during the process, press [REW/–/
+/FF]
Cancelling a preset channel
e.g. If channel 3 is not needed.
Select channel 3.
Press [ PGM/ CLEAR ] on the remote control.
With 10 seconds
Press [REW/–/ ] or [
Press [ PGM/ CLEAR ] on the remote control.
Now when [REW/–/
channel 3 is skipped.
The channel can still be selected with the remote control.
].
".
/+/FF] to select the
".
] or [ /+/FF]
] or [ /+/FF] when you
] or [
/+/FF] so "-- --" is displayed.
] or [ /+/FF] is pressed,
/