Cds - Panasonic RX-EX1 Operating Instructions Manual

PLAY
1
PGM
Number of tracks
10
RQT5671
PLAY RE FADER SLEEP
1
REC
PGM
RANDOM
Displayed when CD not loaded
Label
RE
FADER SLEEP EQ ON
ALL - 1
REC REC ST
RANDOM MONO
Total playing time
PLAY RE FADER SLEEP
1
REC
PGM RANDOM
Track Playing Elapsed time
PLAY RE FADER SLEEP
1
REC
PGM RANDOM

CDs

Press [POWER,
Press [9 9 9 9 9 TAPE/CD] to switch to CD mode.
Each time the button is pressed
TAPE
Press [/ / / / / CD] to open the tray, load a CD, and
press [/ / / / / CD] to close the tray.
Press [B B B B B /; ; ; ; ; CD] to start play.
Plays to the end of the CD and stops.
Turn [–
To stop play
Press [ TAPE/CD].
EQ ON
One touch play
- 1
ALL REC ST
MONO
When a CD is loaded, press [
The unit comes on and play starts.
To pause play
Press [
Press again to resume play.
To skip tracks
Press [REW/–/
Searching through tracks
Press and hold [REW/–/
(forward) during play.
If this unit causes interference to other equipment (radios
and televisions) separate it from the equipment.
EQ ON
- REC
ALL 1 ST
MONO
CD selection
Choose CDs with this mark: (
This unit can play CD-DA format audio CD-R and CD-RW
that have been finalized upon completion of recording.
EQ ON
It may not be able to play some CD-R or CD-RW due to the
- REC
ALL 1 ST
MONO
condition of the recording.
Finalizing is a process that enables CD-R/CD-RW players
to play audio CD-R and CD-RW.
Do not
•use irregularly shaped CDs (
•use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. (
•attach scratch-proof covers or any other kind of accessory.
•write anything on the CD.
•clean CDs with liquids. (Wipe with a soft, dry cloth.)
•use CDs printed with label printers available on the mar-
ket.
] to turn the unit on.
CD
VOLUME +] to adjust the volume.
" " " " " # # # # #
(When using AC power)
CD].
CD] during play.
] (backward) or [
] (backward) or [
)
).
/+/FF] (forward).
/+/FF]
)