Program Play - Panasonic RX-EX1 Operating Instructions Manual

12
RQT5671
Y
PLAY RE FADER SLEEP EQ ON
- REC
1 REC ALL 1 ST
PGM RANDOM MONO
PLAY RE SLEEP
FADER EQ ON
1 ALL 1 - REC
REC ST
PGM RANDOM MONO
CDs

Program play:

Select up to 36 tracks to play in the order you choose
Preparation:
Press [ ] to switch to CD mode.
Remote control only
Press [
PGM/ CLEAR
Enter the track number with the numbered
buttons.
For tracks numbered 10 and over, press [ 10] then the
two digits.
Repeat this step to program the tracks in the required
order.
Press [CD].
All the tracks are played in the selected order.
The program remains intact even if play is stopped or the
unit is turned off. "Cd-P" appears when play is stopped to
indicate the contents are in the memory.
To cancel
Press and hold [ PGM/ CLEAR ] in the stop mode until
"CLEAR" is displayed.
The mode is also canceled if the CD tray is opened.
"FULL" is displayed
If more than 36 tracks have been programmed.
"-- --:-- --" is displayed
If the total play time of the program exceeds 100 minutes.
You can still program and play tracks.
To check the contents of the program
While stopped
Press [REW/–/ ] or [
Each time one of the buttons is pressed, a track and its
order in the program are displayed.
Program play does not work when "
(press [CD PLAY MODE] to clear it) (
Search can be done within tracks only.
].
/+/FF].
" is displayed
page 11).