Rear Wheel - Yamaha 2009 V Star XVS650AY Owner's Manual

Tightening torque:
Wheel axle:
59 Nm (5.9 m·kgf, 43 ft·lbf)
6. Tighten the front wheel axle pinch
bolt to the specified torque.
Tightening torque:
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
7. While applying the front brake,
push down hard on the handlebars
several times to check if the front
fork compresses and rebounds
smoothly.
8. Connect the speedometer cable.
PERIODIC MAINTENANCE AND ADJUSTMENT

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut.
1. Axle nut
2. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the bolt and nut.
3. Loosen the brake torque rod nut at
the swingarm.
7-33
EAU25080 4. Remove the brake pedal free play
adjusting nut, and then disconnect
the brake rod from the brake cam-
EAU25142
shaft lever.
EWA10821
1. Brake pedal free play adjusting nut
2. Brake camshaft lever
3. Bolt and nut (shoe plate)
4. Brake torque rod
5. Bolt and nut (swingarm)
6. Brake rod
5. Remove panel A. (See page 7-6.)
6. Remove the bolts that secure the
final gear case to the swingarm.
7