PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
XVS650Y
7
1. Screw
EAU24283
XVS650AY
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
7-30
Replacing the auxiliary light
bulb (XVS650AY)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
moving the screws.
1. Screw
2. Remove the socket (together with
the bulb) by pushing it in and turn-
ing it counterclockwise.
[ECA10681]
EAU33413